HJXR - US HG Technology Corporation

PRODUCTS LIST

Series

Click series for Specification Chart

Series

Range

Schematic Diagram:

Parameters:

The JXR cross tapered roller bearings are composed of two sets of raceways and rollers that form a large angle with alternate rollers facing opposite directions. Unlike the Crossed Roller Bearing, the Crossed Taper Roller Bearing has tapered rollers as rolling elements. The cross-section height is similar to Single-row Bearing, saving space and the bearing housing material. Due to the tapered geometry with a steep angle, the Crossed taper roller bearing can bear a sizeable overturning moment. It is widely used in large hobbing machines, industrial robots, high-speed vertical lathes, high precision working tables, vertical boring machines, the central axle of grinding machines, etc.

Bearings characteristics:

1. Name: HJXR Series Bearing
2. High precision: precision at P4, P4, P2.
3. High rigidity: these series bearings are with preload.
4. High load capacity: can support radial, axial, and tilting loads.
5. High speed: rollers roll in the raceway, so the limited rate of crossed taper roller bearings is higher than that of crossed cylindrical roller bearings.
6. Low friction: the frictional torque of crossed taper roller bearings is much lower than that of crossed cylindrical roller bearings.

Please contact us at [email protected] regarding the JXR cross tapered roller bearings.

MESSAGE

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.